Pennco NATURAL GAS TO LP Manuel d'utilisateur télécharger pdf

P/N 24004821, Rev. D [11/2014]

CONVERSION INSTRUCTIONS

NATURAL GAS TO LP (SEA LEVEL TO 2000 FEET)

Cast Iron Gas Fired Water Boilers

15B, BWB, UH15B, GMGWB

For Forced Hot Water

WARNING

This conversion kit shall be installed by a qualied

service agency in accordance with the manufacturer’s

instructions and all applicable codes and requirements

of the authority having jurisdiction. If the information

in these instructions is not followed exactly, a re,

an explosion or production of carbon monoxide may

result causing property damage, personal injury or

loss of life. The qualied service agency is responsible

for the proper installation of this kit. The installation

is not proper and complete until the operation of the

converted appliance is checked as specied in the

manufacturer’s instructions supplied with the kit.

KIT CONTENTS

ITEM QTY.

Installation Instructions 1

Conversion Plate/Label 1

Pilot Orice - Spark 1

Pilot Orice - 24 Volt 1

Liquid Sealing Compound 1

Spring Kit 1

Tools Required

Flat Head Screwdriver, 1/4” Nut Driver, 7/16” Open Ended

Wrench, 3/16” Allen Wrench, 18” Manometer (or dial

manometer)

Installation

Turn off gas supply to the boiler.

WARNING

Electrical shock hazard. Turn OFF electrical power

supply at service panel before making electrical

connections. Failure to do so could result in death

or serious injury.

Turn off all electrical to boiler.

Remove front panel.

Remove burner access door.

Remove main gas burner tubes. See Figure 1.

Remove main burner orices. See Figure 1.

Install supplied LP gas main burner orices. See Table3

for orice size and quantities.

Use 7/16” wrench, disconnect pilot tube from pilot. See

Figure 2.

Remove pilot orice. See Figure 2.

10.

Install LP gas pilot orice. See Figure 2.

11.

Apply liquid sealing compound to threads of pilot

assembly tting.

12.

Attach pilot tube to pilot and securely tighten. See

Figure 2.

13.

Replace main gas burner tubes.

14.

Remove the cover screw from gas valve pressure

regulator. See Figure 4.

PILOT ORIFICES

MFG. PART NUMBER

Honeywell 390686-36*

*Use 390686-40 for Boilers Manufactured before July

2008 with Q381 Pilot.

GAS VALVE

KNOB

ORIFICES

BURNERS

Figure 1

Figure 2

Pilot Orice

Pilot

Pilot Tube

1 2 3 4

Résumé du contenu

Page 1 - For Forced Hot Water

P/N 24004821, Rev. D [11/2014]CONVERSION INSTRUCTIONSNATURAL GAS TO LP (SEA LEVEL TO 2000 FEET)Cast Iron Gas Fired Water Boilers 15B, BWB, UH15B, GMGW

Page 2

2NATURAL GAS TO LP CONVERSION INSTRUCTIONSFigure 3 - Gas Valve15. Remove adjustment screw by turning counterclockwise . See Figure 4.16. Remove stainl

Page 3 - Figure 6 - Burner with Mantel

3Figure 4 - Gas ValveNATURAL GAS TO LP CONVERSION INSTRUCTIONS• Thermostat actuates on call for heat, completing circuit to control. • Completed circu

Page 4 - Ignition

NATURAL GAS TO LP CONVERSION INSTRUCTIONSFigure 7 - Pilot3/8” To 1/2” In FlameIgnition Electrode

Commentaires sur ces manuels

Pas de commentaire

Pennco NATURAL GAS TO LP Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Pennco NATURAL GAS TO LP. Pennco NATURAL GAS TO LP User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Pennco NATURAL GAS TO LP